Röntgendiffraktion mit Synchrotronstrahlung

Ausgewählte Publikationen

Eine vollständige Liste der Publikationen an der Beamline P07 finden Sie hier.

2019

B. Wahlmann, F. Galgon, A. Stark, S. Gayer, N. Schell, P. Staron, C. Körner, Growth and coarsening kinetics of gamma prime precipitates in CMSX-4 under simulated additive manufacturing conditions, Acta materialia 180 (2019) 84–96

P. Erdely, P. Staron, A. Stark, T. Klein, H. Clemens, S. Mayer, In situ and atomic-scale investigations of the early stages of gamma precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution, Acta Mater. 164 (2019) 110–121

S. Brunbauer, G. Winter, T. Antretter, P. Staron, W. Ecker, Residual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verification, Mater. Sci. Engin. A 747 (2019) 73–79

N. Manente André, A. Bouali, E. Maawad, P. Staron, J.F. dos Santos, M.L. Zheludkevich, S.T. Amancio-Filho, Corrosion behavior of metal-composite hybrid joints: Influence of precipitation state and bonding zones, Corrosion Science 158 (2019) 108075

B. Domènech, M. Kampferbeck, E. Larsson, T. Krekeler, B. Bor, D. Giuntini, M. Blankenburg, M. Ritter, M. Müller, T. Vossmeyer, H. Weller, G. Schneider, Hierarchical supercrystalline nanocomposites through the self-assembly of organically-modified ceramic nanoparticles, Scientific reports 9(1) (2019) 3435

K. Hauschildt, A. Stark, N. Schell, M. Mueller, F. Pyczak, The transient liquid phase bonding process of a γ-TiAl alloy with brazing solders containing Fe or Ni, Intermetallics 106 (2019) 48–58

2018

P. Erdely, P. Staron, E. Maawad, N. Schell, H. Clemens, S. Mayer, Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase gamma-TiAl based alloy, Acta Mater. 158 (2018) 193–205

G. Dovzhenko, S. Hanke, P. Staron, E. Maawad, A. Schreyer, M. Horstmann, Residual stresses and fatigue crack growth in friction surfacing coated Ti-6Al-4V sheets, J. Mater. Proc. Tech. 262 (2018) 104–110

J.F. dos Santos, P. Staron, T. Fischer, J.D. Robson, A. Kostka, P. Colegrove, H. Wang, J. Hilgert, L. Bergmann. L.L. Hütsch, N. Huber, A. Schreyer, Understanding precipitate evolution during friction stir welding of Al-Zn-Mg-Cu alloy through in-situ measurement coupled with simulation, Acta Mater. 148 (2018) 163–172

S. Hanke, P. Staron, T. Fischer, V. Fitseva, J.F. dos Santos, A method for the in-situ study of solid-state joining techniques using synchrotron radiation – observation of phase transformations in Ti-6Al-4V after friction surfacing, Surface & Coatings Technol. 335 (2018) 355–367

J. Todt, J. Keckes, G. Winter, P. Staron, A. Hohenwarter, Gradient residual strain and stress distributions in a high pressure torsion deformed iron disk revealed by high energy X-ray diffraction, Scripta Mater. 146 (2018) 178–181

F. Appel, J.D.H. Paul, P. Staron, M. Oehring, O. Kolednik, J. Predan, F.D. Fischer, The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys, Mater. Sci. Eng. A 709 (2018) 17–29

2017

P. Erdely, P. Staron, E. Maawad, N. Schell, J. Klose, S. Mayer, H. Clemens, Effect of hot rolling and primary annealing on the microstructure and texture of a b-stabilised g-TiAl based alloy, Acta Materialia 126 (2017) 145–153, doi: 10.1016/j.actamat.2016.12.056

Y. Tian, U. Lienert, A. Borgenstam, T. Fischer, P. Hedström, Martensite formation during incremental cooling of Fe-Cr-Ni alloys: an in-situ bulk x-ray study of the grain-averaged and single-grain behaviour, Scripta Materialia 136 (2017) 124–127, doi: 10.1016/j.scriptamat.2017.04.020

N. Kashaev, V. Ventzke, M. Horstmann, S. Chupakhin, S. Riekehr, R. Falck, E. Maawad, P. Staron, N. Schell, N. Huber, Effects of laser shock peening on the microstructure and fatigue crack propagation behaviour of thin AA2024 specimens, Intern. J. Fatigue 98 (2017) 223–233

2016

P. Erdely, T. Schmoelzer, E. Schwaighofer, H. Clemens, P. Staron, A. Stark, K.-D. Liss, S. Mayer, In situ characterization techniques based on synchrotron radiation and neutrons applied for the development of an engineering intermetallic titanium aluminide alloy, Metals 6 (2016) 1–27, doi:10.3390/met6010010

J. Liu, P. Staron, S. Riekehr, A. Stark, N. Schell, N. Huber, A. Schreyer, M. Müller, N. Kashaev, Phase transformations during solidification of a laser-beam welded TiAl alloy – An in-situ synchrotron study, Met. Mat. Trans. A (2016) DOI: 10.1007/s11661-016-3726-x

M.W. Rackel, A. Stark, H. Gabrisch, F.-P. Schimansky, N. Schell, A. Schreyer, F. Pyczak, Orthorhombic phase formation in a Nb-rich g-TiAl based alloy – an in-situ synchrotron radiation investigation, Acta Materialia 121 (2016) 343-351, doi: 10.1016/j.actamat.2016.09.030

D. Tolnai, R.H. Buzolin, F. D‘Elia, T. Subroto, S. Gavras, A. Stark, N. Schell, K.U. Kainer, N. Hort, The Role of Zn on the Elevated Temperature Compression Behavior of Mg5Nd: An In Situ Synchrotron Radiation Diffraction Study, JOM 68(12) (2016) 3051–3056

2015

J. Liu, P. Staron, S. Riekehr, A. Stark, N. Schell, N. Huber, A. Schreyer, M. Müller, N. Kashaev, In situ study of phase transformations during laser-beam welding of a TiAl alloy for grain refinement and mechanical property optimization, Intermetallics 62 (2015) 27–35

M. Sticchi, P. Staron, Y. Sano, M. Meixner, M. Klaus, J. Rebelo-Kornmeier, N. Huber, N. Kashaev, A parametric study of laser spot size and coverage on the laser shock peening induced residual stress in thin aluminium samples, J. Eng. (2015) DOI: 10.1049/joe.2015.0106

M. Thiry, P. Staron, A. Guirao-Blank, Eigenspannungsmessungen mittels hochenergetischer Synchrotronstrahlung, Lightweight Design 8 (2015) 38–43

G. Winter, J. Klarner, P. Staron, B. Buchmayr, J. Keckes, Experimental Characterization and Modeling of Residual Stress Gradients across Straight and Bent Seamless Steel Tubes, Key Engin. Mater. 651–653 (2015) 231–236

2014
2013
2012
2011